It is a simple, low cost point level switch designed for detection of conductive liquids having low densities, high viscosity, containing solid particles and interface between non-conductive and conductive liquids.

It is an economical. It is for low or intermediate tank level measurement. It is an option for tanks with insertion depths of top mounted models are exceeded.

Float type transmitters provide reliable and durable remote tank gauging. Used for most small to mid-size tanks. A change in liquid level brings the like poles of dual magnets opposite to each other and resulting repulsion force ensures a changeover of contacts with snap action.

This device is a 2-wire TDR level meter for measuring distance, level, volume and mass of liquids and solids. It's simple, compact design allows service technicians to quickly assemble. It is an affordable solution for applications that do not require a high level of accuracy and is also an excellent alternative to traditional level controls such as RF Capacitance, conductive and DP transmitters.

Functions:

• Measures level and interface on challenging applications including foam
• Trouble-free operation since the transmitter is virtually unaffected by dust, vapour, interfering obstacles, and turbulence
• It is even suitable for small or oddly shaped tanks

Features:

• For general-purpose use (non-hazardous areas)
• Measuring range up to 80 ft
• Easy menu navigation without opening the housing
• Probes and process connections are made of stainless steel
• For process temperatures up to 100℃ / 212 ℉ and pressures up to 16 barg / 232 psig
• The display can be ordered with the device or as an accessory. It shows measurement data on a 128 x 64 pixel screen. The configuration menu permits the device to be set up in a small number of intuitive steps.2-wire loop-powered level meter for liquids and solids

The Radar Level Transmitter is accurate, easy to use and cost efficient. Featuring through the air technology, the radar level antenna emits narrow microwave pulses that transmit down the antenna. Non Contact Radar is pre-calibrated at our facility for easy installation.

It is a point level switch based on piezo driven vibrating fork technology. Our product is suitable for detection of liquids in tanks.

Ultrasonic level Sensor

Ultrasonic Level Sensor provides accurate non-contacting level measurement over several ranges. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. Applications include pump control, bulk inventory, batch processing, water management, high/low level alarms and much more.

Functions:

• Our sensors monitor environmental conditions and adjust sensor's transmitters and receivers to match the sensors to any condition, to receive one echo only from measured material and to eliminate any false echoes
• Our Ultrasonic meters have different applications such as (1) Monitoring Liquid levels (2) Monitoring Solid levels (3) High temperature Applications (4) Sanitary Application

Features:

• Unaffected by optical factors like colour and transparency
• Computer (PC) software allows remote adjustment
• Standard RS-485 Serial Interface
• Durable housing for long life
• Threaded at both ends
• Optional threaded jam nut in applications where no threaded fitting is available
• Short & Overload protection I/O
• Adjustable filters compensate for tank mixers or turbulence
• Temperature compensation for improved accuracy
• Adjusted sensitivity

Ultrasonic level Transmitter

Ultrasonic level transmitters supply both short and long range, non-contacting level measurement. We offer only well-built and highly accurate transmitters. These sensors can be configured for level or distance in feet, meters, or a percentage of span.

Functions:

• Self-adjusting, eliminates unwanted echoes
• Plug and play, only 4 mA and 20 mA calibration is needed. Self-cleaning no build-up on transducers faces. The shortest blanking; range up to 100 Ft
• At least 3 updates per second (other brands offer one update per several seconds) Temperature from - 40 C to 120°C. Sanitary mounting available

Features:

• PVC, SS316L or TEFLON materials for transducers
• PVC, Aluminium or SS316L for electronics enclosures The fastest "HART 7" Communication
• Free communication software with diagnostics, Tools and graphics
• Communications with calibration, diagnostics and data logging software
• PLC compatible (Modbus RTU)
• Two, Three & Four Wire Operation
• Self-cleaning operation of sensor face

• FLOAT & TAPE LEVEL GAUGE

It is reliable and accurate level gauge, for continuous level indication of liquid in almost all product applications and tank types. Very commonly used for custody transfer (inventory management).

Functions:

• Seal pot for fuming liquids (optional)
• Water, Corrosive liquids, Hydrocarbons, Chemicals, Varnishes and other Valuable liquids
• Options : Alarm Switches, X'mitter, Counter

Features:

• Easy to install or retrofit on existing tanks
• High accuracy of +2mm
• Local Indicating mechanism of 2 Pointer Dial
• Minimum maintenance
• Range : upto20 mtrs
• Density : ≥0.8 g/cm3
• Wetted Parts : SS316
• Max. Temp : 120℃
• Max. Pressure : Atm
• Enclosure : Cast Al x IP66

• MAGNETIC FLOAT CONTENT GAUGE

Simple & reliable gauge for oil level indication in tanks.

Functions:

• Diesel & Fuel Oil
• Simple & reliable gauge for oil level indication in tanks

Features:

• Range : 400mm
• Liquid Density : 0.8 g/cm3
• Wetted Parts : SS304 with PU Float
• Max. Temp : 70℃
• Max. Pressure : 3 Kg/cm2

• FLOAT & DIAL GAUGE

Reliable & maintenance free gauge suitable for liquid, sumps.

Functions:

• Raw / Sea water, Oils, Effluent & Solvents
• Sumps, Floating Roof / Gas Holding Tanks
• Can be installed in areas with limited headroom
• Can be installed / removed from tanks in service

Features:

• Range : 1 - 10 mtrs
• Density : ≥0.8 g/cm3
• Wetted Parts : SS304/316, PVDF
• Max. Temp : 150℃
• Max. Pressure : Atm
• Enclosure : Cast Al x IP66
• Options : Alarm Switches, x'mitter